USA Sim Card - click logo on left to buy a sim card!

Thanks for choosing to rent a wi-fi hotspot from www.usaprepaidsimcard.com.au!

Your wi-fi hotspot is already activated and ready for you to use as soon as you land in the USA.

It's really easy to get connected, and you'll have 5GB of data to use for 30 days.  You can connect up to a maximum of five concurrent devices to the hotspot.

Here's how to use the hotspot:

1. You should make sure it's fully charged prior to use, but the device will come with some battery power.  You can charge it before you leave for the USA (you'll need a socket adapter because it comes with a USA recharge cable).  Otherwise you can charge it when you get to the USA.  You can also charge it via USB.  Please note that if the battery is completely flat it might take up to 30 minutes for the hotspot to turn on even when being charged.

2. Turn on the hotspot by holding down the power button on the top of the device for about 2-3 seconds.  The device will boot up and connect to the network.

3. Open the wi-fi connection manager on the device you want to connect to the hotspot (for example your iPad, Tablet, Phone, Laptop etc).

4. Search for, and connect to, the wi-fi network called "USAPrePaidSimCard".

5. On the device you're connecting to the hotspot you'll need to enter the password "99601234" (without the quotation marks).

6. Enjoy high speed 4G internet access!

How to check remaining data balance?

1. Be connected to the hotspot.

2. In a web browser on your phone, laptop, tablet, iPad etc go to att.elevate.  At the top of the page enter "attadmin" (without the quote marks) as the admin login.

3. Next, go to https://www.paygonline.com/websc/loginPage.html and choose "forgot password".  Now, look back at the att.elevate page and enter the USA wireless number of the hotspot in the "forgot password" form.   You can see the USA wireless number example in the screen shot above (your wireless number will be different).

Within a few seconds a new passcode will be sent to the hotspot via SMS.  

4. To read the SMS, go back to the att.elevate page on the left and select messages.  Check the most recent SMS sent to the device which will have the new passcode to log into the https://www.paygonline.com/websc/loginPage.html page.

5. Now, log into the https://www.paygonline.com/websc/loginPage.html page.  You'll need to select a new passcode of four digits.  Once logged in, enter your email address.  You'll then be able to see how much remaining data you have.